Seal Kit equivalent to KOMATSU® Part Number 707-99-68780
New OEM Aftermarket Seal Kit (Not branded KOMATSU®, direct replacement). This seal kit is a high-quality, direct replacement of original parts, at a fraction of the cost.
Description of KOMATSU® Replacement Seal 707-99-68780
Used in the following applications:
PC400LC-8 S/N 70001-UP EXCAVATORS
- SERVICE KIT PARTS » 707-99-68780
PC400-8 S/N 70001-UP EXCAVATORS
- SERVICE KIT PARTS » 707-99-68780
PC400-8R S/N 75001-UP EXCAVATORS
- SERVICE KIT PARTS » 707-99-68780
PC400LC-8R S/N 75001-UP EXCAVATORS
- SERVICE KIT PARTS » 707-99-68780
PC450-8 S/N 70001-UP EXCAVATORS
- SERVICE KIT PARTS » 707-99-68780
PC450-8R S/N 75001-UP EXCAVATORS
- SERVICE KIT PARTS » 707-99-68780
PC450LC-8 S/N 70001-UP EXCAVATORS
- SERVICE KIT PARTS » 707-99-68780
PC450LC-8R S/N 75001-UP EXCAVATORS
- SERVICE KIT PARTS » 707-99-68780
PC550LC-8 S/N 70458-UP EXCAVATORS
- SERVICE KIT PARTS » 707-99-68780
PC240LC-8K S/N K50001-UP EXCAVATORS
- BOOM ADJUST CYLINDER (INNER PARTS) (FOR 2 PIECE BOOM) » 707-99-68780
PC240NLC-8K S/N K50001-UP EXCAVATORS
- BOOM ADJUST CYLINDER (INNER PARTS) (FOR 2 PIECE BOOM) » 707-99-68780
PC400-7-M1 S/N 50001-UP EXCAVATORS
- ARM CYLINDER » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR LOADER) » 707-99-68780
PC400-7 S/N 50001-UP (Overseas Version) EXCAVATORS
- ARM CYLINDER (FOR 100 HOURS LUBRICATION) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) (100 HOURS GREASING BOOM TYPE) » 707-99-68780
- ARM CYLINDER (FOR LOADER) » 707-99-68780
- ARM CYLINDER(#50001-50146) » 707-99-68780
- ARM CYLINDER(#50147-) » 707-99-68780
PC400-7E0 S/N 60001-UP (ecot3) EXCAVATORS
- ARM CYLINDER » 707-99-68780
- ARM CYLINDER (FOR 100 HOURS LUBRICATING) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR LOADER) » 707-99-68780
PC400-8 S/N 70001-70003 EXCAVATORS
- ARM CYLINDER(#70001-) » 707-99-68780
- ARM CYLINDER(#70001-) » 707-99-68780
PC400LC-8 S/N A88001-UP EXCAVATORS
- T1120-02A0 ARM CYLINDER » 707-99-68780
- T1120-04A0 ARM CYLINDER 2.4 M ARM » 707-99-68780
PC400LC-7L S/N A86001-UP EXCAVATORS
- ARM CYLINDER (STANDARD) » 707-99-68780
PC400LC-7-M1 S/N 50001-UP EXCAVATORS
- ARM CYLINDER » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR LOADER) » 707-99-68780
PC400LC-7 S/N 50001-UP (Overseas Version) EXCAVATORS
- ARM CYLINDER (FOR 100 HOURS LUBRICATION) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) (100 HOURS GREASING BOOM TYPE) » 707-99-68780
- ARM CYLINDER (FOR LOADER) » 707-99-68780
- ARM CYLINDER(#50001-50146) » 707-99-68780
- ARM CYLINDER(#50147-) » 707-99-68780
PC400LC-7E0 S/N 60001-UP (ecot3, For EU) EXCAVATORS
- ARM CYLINDER » 707-99-68780
- ARM CYLINDER (FOR 100 HOURS LUBRICATING) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
PC400LC-7E0 S/N A87001-UP EXCAVATORS
- ARM CYLINDER (BREAK DOWN) » 707-99-68780
- ARM CYLINDER (INNER PARTS) » 707-99-68780
PC400LC-7E0 S/N 60001-UP (ecot3) EXCAVATORS
- ARM CYLINDER » 707-99-68780
- ARM CYLINDER (FOR 100 HOURS LUBRICATING) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR LOADER) » 707-99-68780
PC400LC-8 S/N 70001-70003 EXCAVATORS
- ARM CYLINDER(#70001-) » 707-99-68780
PC450-7K-E0 S/N K45001-UP EXCAVATORS
- ARM CYLINDER (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) (FOR BURST VALVE) » 707-99-68780
- ARM CYLINDER (FOR HEAVY DUTY BOOM) » 707-99-68780
PC450-8 S/N K50001-UP EXCAVATORS
- ARM CYLINDER (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR BURST VALVE) (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR BURST VALVE) (FOR 2.4M ARM) » 707-99-68780
PC450-7 S/N 20001-UP (Overseas Version) EXCAVATORS
- ARM CYLINDER (FOR SOUTH AFRICA) » 707-99-68780
PC450-7-M1 S/N 20001-UP EXCAVATORS
- ARM CYLINDER » 707-99-68780
PC450-7K S/N K40001-UP EXCAVATORS
- ARM CYLINDER (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR BURST VALVE) (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR BURST VALVE) (FOR 2.4M ARM) » 707-99-68780
PC450-8 S/N 70001-70003 EXCAVATORS
- ARM CYLINDER(#70001-) » 707-99-68780
PC450LC-8K HIGH REACH DEMOLITION S/N K50048-UP EXCAVATORS
- DIG ARM CYLINDER (INNER PARTS) » 707-99-68780
PC450LC-7 S/N 20001-UP (Overseas Version) EXCAVATORS
- ARM CYLINDER (FOR 100 HOURS LUBRICATING) » 707-99-68780
PC450LC-7-M1 S/N 20001-UP EXCAVATORS
- ARM CYLINDER » 707-99-68780
PC450LC-7K S/N K40001-UP EXCAVATORS
- ARM CYLINDER (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR BURST VALVE) (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR BURST VALVE) (FOR 2.4M ARM) » 707-99-68780
PC450LC-7K-E0 S/N K45001-UP EXCAVATORS
- ARM CYLINDER (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) (FOR BURST VALVE) » 707-99-68780
- ARM CYLINDER (FOR HEAVY DUTY BOOM) » 707-99-68780
PC450LC-8 S/N 70001-70003 EXCAVATORS
- ARM CYLINDER(#70001-) » 707-99-68780
- ARM CYLINDER(#70001-) » 707-99-68780
PC450LC-8 S/N K50001-UP EXCAVATORS
- ARM CYLINDER (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR BURST VALVE) (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR BURST VALVE) (FOR 2.4M ARM) » 707-99-68780
PC450LCHD-8 S/N K50001-UP EXCAVATORS
- ARM CYLINDER (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR BURST VALVE) (EXCEPT 2.4M ARM) » 707-99-68780
- ARM CYLINDER (FOR BURST VALVE) (FOR 2.4M ARM) » 707-99-68780
PC450LC-8 S/N A10001-UP EXCAVATORS
- T1120-02A0 CYLINDER ARM » 707-99-68780
- T1120-04A0 CYLINDER ARM FOR 2.4 M ARM » 707-99-68780
PC490LC-10 S/N A40001-UP EXCAVATORS
- T1200-004003 CYLINDER FOR 2.4 M EXTRA SHORT ARM » 707-99-68780
PC600-7 S/N 20001-UP (Overseas Version) EXCAVATORS
- COUNTER WEIGHT REMOVER CYLINDE (GROUND INSTALLATION TYPE)(#20050-) » 707-99-68780
PC600LC-7 S/N 20001-UP (Overseas Version) EXCAVATORS
- COUNTER WEIGHT REMOVER CYLINDE (GROUND INSTALLATION TYPE)(#20050-) » 707-99-68780
*All manufacturer’s names, part numbers, and descriptions are used for reference purposes only. We do not imply that any part shown is the product of these manufacturers. We also do not imply that the list price shown is exactly that of the manufacturer.
Products Show
Hight Quality Seals
Replacement OEM Seals
Factory Direct Sales
Hydraulic Cylinder Seal Kit Components | |||
Items | Brand | Material | Color |
Rod Seals | NOK/SKF/H605 | Urethane (TPU) | Ivory/Blue/Gray |
Buffer Seals | JSPSEAL | Urethane+PA or PTFE Bronze+NBR | Ivory/Purple |
Wipers | JSPSEAL | Urethane+Metal or NBR+Metal | Ivory/Black |
Piston Seals | JSPSEAL | PTFE Bronze+NBR+PA OR Nylon+NBR | Brown/Green/Gold |
Wear Rings | JSPSEAL | Phenolic Resion Cotton Fabric or PTFE Bronze | Brown/Blue/Yellow |
Backup Rings | JSPSEAL | PA or PTFE or PTFE Bronze | Black/White/Brown |
O-Rings | JSPSEAL | NBR (Hardness 90 Shore A) | Black |
Why choose JSPSEAL seal kit
1.Experience. We have been selling in the aftermarket for nearly 20 years, we know more about what kind of seal kits the machine needs under bad work conditions.
2.The accuracy of the dimensions.The same part number as the OEM, easy to query and purchase.
3.Price. We can beat all OEM parts in value, while as stated above the qulity of the parts will remain the same.
4.Lead Times. JSPSEAL products have been exported for more than 10 years, and our extensive export experience can help you solve various transportation problems. We can ensure fast and efficient lead times across all JSPSEAL Parts.
How to find seal kit part number ?
To find the exact part for your machine, the best way to do it is to fin out the part number you need, and then search it in our search bar on our homepage, www.jspseal.com . This will show you the right part for what you need, and you can order quickly without fuss.
However, if you can't find the part you need please contact us and we will source it for you.
Our Services
What are JSPSEAL Hydraulic Seal made from?
Hydraulic seals can be made from a variety of materials such as polyurethane, rubber or PTFE ect. The type of material is determined by the specific operating conditions or limits due to seal type, pressure, fluid chemical compatibility, speed, surface roguhness, Radial load, Hydraulic shock, or temperature.
Material Characteristics
Material | Temperature | Media | Velocity | Pressure(MPa) |
NBR | -45°C to +140°C | Mineral oil baed, hydraulic fluids,biological degradable oils water | 0.5 | 25 |
FKM | -20°C to +200°C | Mineral oil baed | 0.5 | 25 |
PU | -30°C to +100°C | Mineral oil baed, hydraulic fluids | 0.8 | 35 |
TPE | -40°C to +110°C | Mineral oil baed | 0.8 | |
POM | -45°C to +120°C | Mineral oil baed | 0.8 | |
PA | -45°C to +120°C | Mineral oil baed | 1.0 | |
PTFE | -55°C to +200°C | Mineral oil baed,biological degradable oils water | 15 | 40 |
PHENOLIC RESIN COTTON FABRIC | -50°C to +120°C | Mineral oil baed,biological degradable oils water | 1.0 |
JSPSEAL aims at win-win situation with China customer. We’re able to improve customer competitiveness with our product and service.
Why Choose JSPSEAL Seal part?
We have been selling in the aftermarket for nearly 20 years, we know more about what kind of seal the machine needs under bad work conditions. And precision molds ensure product size. Original imported raw materials ensure the mechanical properties of the products.
JSPSEAL products have been exported for more than 10 years, and our extensive export experience can help you solve various transportation problems.we can ensure fast and efficient lead times across all JSPSEAL Parts.